Products | Omni m2m

CalAmp LMU-4200 Series

Omni m2m — Tue, 11 Feb 2020 05:56:08 +0000

Market Applications

Domestic Fleet Management
Connected Vehicle Solutions
Cargo Monitoring

Features

Built-in Motion Sensor
Built-in Antenna for Easy Installation
Weatherproof (IP66)
Extensive Power Management
2,000 Buffered Messages on Non-Rechargeable Battery

Compatible Accessories

5C875	Splice-in, 3-Wire Starter Disable Kit, with relay, 1ft
5C888	Power Harness: 4-pin to 4-wire with Fuse
5C889	Power Harness: 22-pin to 20-wire I/O Harness, Non-Fused, 6″
5C896	Power Harness, Splice on OBII Port for Quick Connect
5C981	Power Harness, LMU-42xx to MDT7-P Android Tablet
5C420	Power Harness: 22-pin & 4-pin to 1-Bit Bus (2-pin), Switch/LED (4-pin), Buzzer (3-pin) and 3-wire Power Harness with Fuse, 6’4″
4C763	iButton Reader and Cable Assembly (use with 5C250 or 5C260), 4′
4C764	SWITCH/LED AND CABLE ASSY, 4 FT (USE WITH 5C250)
4C765	Buzzer and Cable Assy (use with 5C250 or 5C260), 2′
133688	Garmin 5-pin Serial Cable, Mini USB, 9′
134364-MDT12	Serial Adapter: 5-pin to DE9 Male (DTE) with Switched Power and Selectable Voltage (12V default), 1′
134364-SER	Serial Programming Cable: DE9 Female (DCE) to 5-pin Universal
RM1353-TB-04	Antenna: Roof Mount Antenna SMA/SMC, TriBand (Higher Accuracy Gain), 9′
IV1353-QB-02	Antenna: Window Mount, SMA/SMC, QuadBand, 9′
4A729-2J4841PGF-3	In-Vehicle Window Mount LTE Antenna
133568	Mounting Bracket, LMU-4230×3
134385	Temperature Sensor: 1-bit Bus, 4 leads, splice in.
134615-VPOD2	vPOD 5-pin Serial OBDII Adapter
134615-VPOD2R	vPod2R, Ext OBDII Dongle, 5pin
134938-BT	Bluetooth dongle
JPOD2-ACC-G1000	JPOD2, EXTERNAL DONGLE, TH CONNECTOR, 5-WIRE, GEN-HW
1BF112-453443CON	Battery. LI-ION, 1000MAH, 3.7V
5C354F-1	VPOD2/VBU cable to be used w/LMU-4230 only
5C356-2	JPOD TO J1939 9 PIN DEUTSCH TYPE I MALE AND FEMALE ROUND, DE-15 MALE, THREADED Y CABLE (CAN+1708), 2 METERS
5C909-2	jPOD to J1939, Y Pass-through cable, 2 meters
5C909-5	jPOD to J1939, Y Pass-through cable, 5 meters
5C909L-2	jPOD to J1939, Y Pass-through cable, Low Profile, 2 meters
5C941S	SERIAL CABLE ADAPTER, 5-PIN MOLEX TYPE TO 4-PIN ROUND SEALED CONNECTOR (FOR TTU-3640)
5C970-2	jPOD to 6 Pin J1708 Y Cable, 2 Meter
5C971-1	jPOD to J1962 Light Duty Ribbon, Extension Cable, 1 Meter (Not CAN compliant); Special Order
5C971-2	jPOD to J1962 Light Duty Ribbon Extension Cable, 2 Meter (Not CAN compliant) – Spcl Order
5C971F-1	vPOD Female to OBD2 Light Duty Extension Cable, 1Meter
5C972-2	jPOD to J1962 CAN-only HINO Only! Y-cable, 2 Meter
5C973-2	JPOD TO J1962 Y CABLE VOLVO/MACK, 2 METER
5C990-2	jPOD TO J1962 Y CABLE
5C992-2	Revised 5C909L cable w/type 2 (green) connectors, 500K, Deutsch 9pin, J1708 on F/G pins
5C991-2	OBD extension cable – OBD compliant
5C993-2	JPOD To Deutsch 9 Pin J1939 Type 2, Threaded Y Connector
5C994-2	JPOD TO DEUTSCH 9 PIN J1939 TYPE 2 CONNECTOR (REPLACES 5C909L), 500K, 2ND CAN PROTOCOL ON F/G PINS, SQUARE FLANGE END
5C944-2	Revised 5C909L cable w/type 2 (green) connector, 500K Deutsch 9pin, 2nd CAN protocol on F/G Pins
5C994R-2	2JPOD To Deutsch 9 Pin J1939 Type 2 connector
5C995	OBD extension cable – OBD compliant
5C997	VEHICLE DIAGNOSTIC CABLE, VOLVO 2014 AND ABOVE, 2 METERS
FOB10-BL300-G1000	Bluetooth, 3-Button Keyfob (require LMU with Bluetooth)

The post CalAmp LMU-4200 Series appeared first on Omni m2m.

4GF546-8113

Omni m2m — Tue, 11 Feb 2020 05:03:49 +0000

Ultra-wideband blade antenna; 4 in/10 cm (SMA) cellular (LTE 4G/3G) or GPS

The post 4GF546-8113 appeared first on Omni m2m.

TTU-1200 Custom Bundle

Omni m2m — Tue, 11 Feb 2020 04:51:55 +0000

Overview

COMPETITIVE PRICE, COMPETITIVE TECHNOLOGY, COMPETITIVE EDGE

The TTU-1200 high-value tracking unit from CalAmp features a small size, superior GPS performance, an internal 3.8 Ah battery and three Inputs/Outputs (I/O). The TTU-1200 is a complete vehicle tracking and communications device incorporating next-generation, super-sensitive GPS technology on GPRS, CDMA and HSPA cellular networks for installation in any 12 or 24 volt mobile vehicle. Superior internal antennas for both cellular and GPS eliminate the need for wired antennas and make the TTU-1200 mountable virtually anywhere in the vehicle for easy, inexpensive installations. Messages are transported across the cellular network using enhanced SMS or UDP messaging providing a reliable communications link between the device and your application servers. The TTU-1200 is designed to dramatically reduce cost of ownership, power and size while providing excellent field reliability.

FLEXIBILITY

The TTU-1200 employs CalAmp’s industry leading on-board alert engine, PEG (Programmable Event Generator). This advanced engine monitors external conditions and supports customer-defined, exception-based rules to help meet the needs of your application. PEG continuously monitors the vehicle environment and responds instantaneously to pre-defined threshold conditions related to time, date, motion, location, geo-zone, input and other event combinations. With PEG, your unique application will meet demanding customer requirements. This behavior can be programmed by CalAmp before shipment, at a customer’s facility, or over-the-air once the unit has been fielded.

OVER-THE-AIR SERVICEABILITY

The TTU-1200 also leverages CalAmp’s industry leading over-the-air device management and maintenance system, PULS (Programming, Updates, and Logistics System). Configuration parameters, PEG rules, and firmware can all be updated over the air. PULS offers out-of-the-box, hands-free configuration and automatic post-installation upgrades. You can also monitor unit health status across your customers’ fleets to quickly identify issues before they become expensive problems.

Specifications

General

Communication Modes

GPRS/EDGE/HSPA and CDMA 1xRTT packet data, UDP and SMS

Location Technology

50 channel GPS

Operating Voltage

12 and 24 volt vehicle systems

GPS

Location Technology

50 channel GPS (with SBAS) SBAS: WAAS, EGNOS, MSAS, GAGAN

Location Accuracy

2.0 meter CEP (with SBAS)

Tracking Sensitivity

-162dBm

Acquisition Sensitivity

-147dBm

AGPS Capable

Batter Pack

Battery Capacity

3.8 amp hour

Batter Operating Voltage

3.6 volts

Battery Technology

Lithium ion

Battery Charge Time

6 hours

Cellular

Data Support

SMS, GPRS, CDMA 1xRTT or HSPA packet data

Operating Bands (MHz)

GSM/GPRS:

850/900/1800/1900

CDMA/1XRTT:

850/1800

HSPA/UMTS:

800(VI)/850(V)/900(VIII)/1700(IV)/1900(II)/2100(I)

Transmitter Power

GSM/GPRS:

850/900/1800/1900

CDMA/1XRTT:

850/1800

HSPA/UMTS:

All bands

HSPA Data Rates

5.6 Mbps upload/7.2 Mbps download

HSPA Fallback

EDGE/GPRS/GSM quad band EDGE MCS1-MCS9 3GPP Release 6

Comprehensive I/O

Digital Inputs

3 fixed bias

Outputs

3 open collector (150mA)

Status LEDs

GPS and cellular

Environmental

Temperature

-30º to +75º C (operating); -40º to +85º C (storage)

Humidity

95%RH @ 50º C non-condensing

Shock and Vibration

SAE J1455

EMC/EMI

SAE J1113; FCC–Part 15B; Industry Canada

RoHS Compliant

Electrical

Operating Voltage

6-32 VDC

Power Consumption

2 mA @ 12V (deep sleep) 10 mA @ 12V (sleep on network) 70 mA @ 12V (active standby)

Physical

Dimensions

2.125 x 4.33 x 1.59”, (54 x 110 x 40.4mm)

Weight

8 oz, (226g)

Connectors, SIM Access

SIM Access

Internal

Certifications

Fully certified FCC, CE, IC, PTCRB, Applicable Carriers

Mounting

Standard tie-wrap or adhesive Screw mounting bracket

Features

Key Features

6 months with single message cycle per day on fully charged batteries

3.8 Ah lithium ion rechargeable battery pack

IP66 sealed enclosure

Packet data (GPRS, CDMA 1xRTT, or HSPA) and SMS-based messaging GPRS

Internal GSM and GPS aAntennas

Super sensitive GPS (-162 dBm tracking)

Ultra-low power safe mode (<2mA)

3 axis accelerometer for motion sensing

3 inputs and 3 outputs

Voltage monitoring and low battery notification

20,000 buffered messages

4 built-in geo-fences

PEG Exception-Based Rules

Automatic, over-the-air unit configuration on power-up (PULS)

Over-the-air firmware download (PULS)

Web-based device management (PULS)

Development Support Options

Customized hardware and software development available on request

Programming and Management Tools

Learn more about PEG and PULS, complimentary tools available to solution providers and channel partners for managing CalAmp devices.

Compatible Accessories

134364-SER	Serial Programming Cable: DE9 Female (DCE) to 5-pin Universal
5C942	Serial Programming Pigtail: 5-pin to 4-pos terminal block (use with 134364-SER), 6″
4C765	Buzzer and Cable Assembly (use with 5C250 or 5C260), 2′

The post TTU-1200 Custom Bundle appeared first on Omni m2m.

LMU-1100 Custom Bundle

Omni m2m — Tue, 11 Feb 2020 04:44:38 +0000

Overview

COMPETITIVE PRICE, COMPETITIVE TECHNOLOGY, COMPETITIVE EDGE

The LMU-1100 high-value tracking device from CalAmp features a small size, superior GPS performance, an internal 1000 mAh back-up battery and 2 inputs/ 1 output (I/O). The LMU-1100 is a complete vehicle tracking and communications device incorporating next-generation, super-sensitive GPS technology on cellular networks for installation in any 12 or 24 volt mobile vehicle. Superior internal antennas for both cellular and GPS eliminate the need for wired antennas and make the LMU-1100 mountable virtually anywhere on or in the vehicle for easy, inexpensive installations. Messages are transported across the cellular network using enhanced SMS or UDP messaging providing a reliable communications link between the device and your application servers. The LMU-1100 is designed to dramatically reduce cost of ownership, power and size while providing excellent field reliability.

FLEXIBILITY

The LMU-1100 employs CalAmp’s advanced industry-leading on-board alert engine, PEG (Programmable Event Generator) to monitor external conditions and support customer-defined, exception-based rules to meet your application requirements. PEG monitors the vehicle environment and responds instantaneously to pre-defined threshold conditions related to time, date, motion, location, geo-zone, input and other event combinations. This behavior can be programmed by CalAmp before shipment, at a customer’s facility, or over-the-air once the unit has been fielded.

OVER-THE-AIR SERVICEABILITY

The LMU-1100 leverages CalAmp’s management and maintenance system, PULS (Programming, Updates, and Logistics System), for over-the-air configuration parameters, PEG rules, and firmware. This out-of-the-box, hands-free configuration and automatic post-installation upgrades can monitor unit health status across your customers’ fleets to identify issues before they become expensive problems.

Specifications

General

Communication Modes

UDP packet data and SMS

Location Technology

50 channel GPS

Operating Voltage

12 and 24 volt vehicle systems

GPS

Location Technology

50 channel GPS (with SBAS) SBAS: WAAS, EGNOS, MSAS, GAGAN

Location Accuracy

2.0 meter CEP (with SBAS)

Tracking Sensitivity

-162dBm

Acquisition Sensitivity

-147dBm

AGPS Capable

Cellular

Data Support

SMS, UDP packet data

Operating Bands (MHz)

GSM/GPRS:

850/900/1800/1900

CDMA/1XRTT:

850/1900

HSPA/UMTS:

800(VI)/850(V)/900(VIII)/1700(IV)/1900(II)/2100(I)

Transmitter Power

GSM/GPRS:

850/900, 32.5 dBm 1800/1900, 29.3 dBm

CDMA/1XRTT:

850, 24 dBm; 1900, 23 dBm

HSPA/UMTS:

All bands, 23 dBm

HSPA Data Rates

5.6 Mbps upload/7.2 Mbps download

HSPA Fallback

EDGE/GPRS/GSM quad band EDGE MCS1-MCS9 3GPP Release 6

Comprehensive I/O

Inputs

Outputs

1 relay driver (150mA)

1-Wire® Interface

Status LEDs

GPS and cellular

Environmental

Temperature

-30º to +75º C (operating); -40º to +85º C (storage)

Humidity

95%RH @ 50º C non-condensing

Shock and Vibration

U.S. Military Standards 202G and 810F, SAE J1455

EMC/EMI

SAE J1113; FCC–Part 15B; Industry Canada

RoHS Compliant

Electrical

Operating Voltage

6-32 VDC

Power Consumption

<2 mA @ 12V (deep sleep) <10 mA @ 12V (sleep on network with SMS) <20 mA @ 12V (sleep on network with GPRS) <70 mA @ 12V (active standby)

Physical

Dimensions

2.5 x 3.125 x 0.875”, (63.5 x 80 x 23mm)

Weight

3 oz, (85g) (internal)

Connectors, SIM Access

Connection Type

Molded power and I/O harness

SIM Access

Internal

Certifications

Fully certified FCC, CE, IC, PTCRB, Applicable Carriers

Mounting

Tie-wrap, adhesive, or Velcro Screw mounting bracket

Features

Key Features

UDP and SMS messaging

Water resistant

Internal cellular and GPS antennas

Super sensitive GPS (-162 dBm)

Internal back-up 1000mAh battery

Ultra-low power sleep mode (<2mA)

3-axis accelerometer for motion sense and tilt

Voltage monitoring and low battery notification

2,000 buffered messages

10 built-in geo-fences

PEG exception-based rules

Automatic, over-the-air unit conguration on power-up (PULS)

Over-the-air firmware download (PULS)

Web-based device management (PULS)

Optional Features/Functions

Temperature sensing via 1-wire protocol

Serial cable

Development Support Options

Customized hardware and software development available on request

Programming and Management Tools

Learn more about PEG and PULS, complimentary tools available to solution providers and channel partners for managing CalAmp devices.

Compatible Accessories

134364-SER	Serial Programming Cable: DE9 Female (DCE) to 5-pin Universal
5C940	Serial Programming Pigtail (use with 134364-SER), 6″
134385	Temperature Sensor: 1-bit Bus, 4 leads, splice in.
4C765	Buzzer and Cable Assy (use with 5C250 or 5C260), 2′

The post LMU-1100 Custom Bundle appeared first on Omni m2m.

Ultra Sonic Fuel Sensor Kit

Omni m2m — Tue, 11 Feb 2020 04:44:18 +0000

The Ultra Sonic Fuel Level Sensor Kit is an add-on accessory which can be bundled with the following CalAmp devices:

LMU-2600 Series
LMU-2700 Series

The sensor is designed to provide visibility into vehicle fuel levels through a simple installation process without the need to drill into your fuel tank.

The post Ultra Sonic Fuel Sensor Kit appeared first on Omni m2m.

Serial Adapter – 133360

Omni m2m — Tue, 11 Feb 2020 04:40:52 +0000

Serial Adapter: 4-pin to 4-wire Pigtail for 20-Pin connector, 6″ (Once Inserted, Cannot Be Removed, for use with 133337)

The 133360 is compatible with the following devices:

LMU-300 Series
LMU-600 Series
LMU-700 Series
LMU-800 Series
LMU-900 Series
LMU-1100 Series
LMU-1200 Series
LMU-2000 Series
LMU-2120 Series
LMU-2610 Series
LMU-2620 Series
LMU-2720 Series
LMU-3000 Series
LMU-4200 Series
LMU-4500 Series
LMU-5000 Series
TTU-330 Series
TTU-700 Series
TTU-1200 Series
TTU-2820 Series
ATU-620 Series

The post Serial Adapter – 133360 appeared first on Omni m2m.

Apex Black Right Angle TG.30 Ultra-Wideband 4G LTE Antenna

Omni m2m — Tue, 11 Feb 2020 04:38:11 +0000

Description

The post Apex Black Right Angle TG.30 Ultra-Wideband 4G LTE Antenna appeared first on Omni m2m.

RM1353-TB-04

Omni m2m — Tue, 11 Feb 2020 04:38:04 +0000

Antenna: Roof Mount Antenna SMA/SMC, TriBand (Higher Accuracy Gain), 9′

The RM1353-TB-04 is compatible with the following devices:

LMU-800 Series
LMU-900 Series
LMU-1200 Series
LMU-2600 Series
LMU-2700Series
LMU-4200 Series

The post RM1353-TB-04 appeared first on Omni m2m.

ATrack AK11 LTE GPS Tracking Device

Omni m2m — Tue, 11 Feb 2020 04:26:57 +0000

Overview

ATrack’s LTE GPS Tracking Device

The AK11 LTE GPS Tracking Device is a flexible fleet and asset management device made for real-time management of both small and large fleets across various market verticals. Additionally, the Bluetooth feature offers communication with Android/iOS applications. The compatibility with OBDII, J1939, J1708, and FMS rules means the AK11 is fitting for all vehicle classes. Plug and Play adaptors make the installation process quick and easy. The AK11 also has a high sensitivity GNSS design which provides fast and accurate vehicle locations. Finally, the LTE GPS tracking device includes multiple input/output configurations that allow for driver ID, as well as sensor monitoring.

Specifications

General

Communication Modes

GPRS/EDGE/HSPA and CDMA 1xRTT packet data, UDP and SMS

Location Technology

50 channel GPS

Operating Voltage

12 volt vehicle systems

GPS

Receiver

72 Receiver Channels, GPS L1 Band C/A Code, GLONASS L10F

Accuracy

3.0 m, CEP, 50%, > 6 SVs

Tracking Sensitivity

-165dBm

Data Acquisition Rate

1Hz

GPS Antenna

Internal Patch Antenna (Optional – External Active Antenna)

GPS Data Buffer Capacity

8MB

Cellular Network Communication

Operating Bands (MHz)

LTE Bands: 2, 4, 5, 12, 25, 26

Cellular Antenna

Internal Antenna; Antenna Diversity Supported

SIM Card

1.8V/3V Mini SIM (2FF)

Comprehensive I/O

Accelerometer Input

1 Positive Triggered

Digital Input

1 Positive, 3 Negative Triggered {4 Output Port can change to Digital input (2 Positive and 2 Negative Triggered)}

Digital Outputs

5 Open-Collect Output (Max. sink current 300mA MAX)

Analog Input

1 (0 ~ 40VDC/0 ~ 5VDC, 12 bits resolution) (2 Output Port can change to Analog Input)

1-Wire® Interface

Support up to 1 iButton® and 4 temperature sensors

Built-in Buzzer

RS-232 Interface

1 (Configurable Baud Rate 1200bps~115200bps)

OBD-CAN BUS/J1939

OBDII

1 (Support OBD J 1850 protocol)

RS485

USB

1(Mini USB type for configuration only)

Environmental

Temperature

-40º C to +85º C (without internal battery)

Electrical

Power Supply

8V ~ 36V DC

Backup Battery

Internal 3.7V 920 mAh Rechargeable Lithium-ion Battery

Physical

Dimensions

6.93″ x 3.50″ x 1.18” , (176 x 89 x 30mm)

Certifications

FCC, IC, CE, RoHS, PTCRB

Mounting

Mounting Kit

Features and Benefits

Features

• LTE Bands (2, 4, 5, 12, 25, 26) • Multiple vehicles supported: OBDII, J1929, J1708, and FMS • 1000 mAh back-up battery (6 months) • GPS location based services • Built-in 3-axis G-sensor • Bluetooth for IoT applications • ELD compliant reporting capabilities • Harsh driving behavior events • Inputs for driver identification and sensor monitoring

Benefits

• Latest 4G cellular technology • Alert notifications via Email or SMS • Automated record keeping for fleet management • Firmware over the air upgrade via FTP protocol

Development Support Options

Customized hardware and software development available on request

Programming and Management Tools

Learn more about PEG script, complimentary tools available to solution providers and channel partners for managing Atrack devices.

Application

Heavy-duty engine vehicle
Construction equipment
Public safety vehicle

The post ATrack AK11 LTE GPS Tracking Device appeared first on Omni m2m.

Rare Earth Magnet

Omni m2m — Tue, 11 Feb 2020 04:25:30 +0000

Rare Earth Magnet (Individual Piece). Order 4 pieces for each Lanyard Magnet Mounting Kit (133561)

The post Rare Earth Magnet appeared first on Omni m2m.