CalAmp LMU-4200 Series

$106.25$326.67

The LMU-4200 is designed to support customers needing an array of vehicle interfaces. For example, the serial ports supply switchable power at selectable voltages to ease the installation of peripheral data devices. The optional jPODTM ECU (Engine Control Unit) interface reads and transmits heavy-duty engine condition and performance data such as engine temperature along with the fault codes to provide the best possible real-time picture of vehicle health.

Note: Need 5C909 Cable for JPOD

Clear

SKU: N/A Categories: , , , ,

Description

Overview

COMPETITIVE PRICE, COMPETITIVE TECHNOLOGY, COMPETITIVE EDGE

The LMU-4200 is designed to support customers needing an array of vehicle interfaces. For example, the serial ports supply switchable power at selectable voltages to ease the installation of peripheral data devices. The optional jPODTM ECU (Engine Control Unit) interface reads and transmits heavy-duty engine condition and performance data such as engine temperature along with the fault codes to provide the best possible real-time picture of vehicle health.

FLEXIBILITY

The LMU-4200 employs CalAmp’s industry leading on-board alert engine, PEG™ (Programmable Event Generator). This advanced engine monitors external conditions and supports customer-defined, exception-based rules to help meet the needs of your application. PEG continuously monitors the vehicle environment and responds instantaneously to pre-defined threshold conditions related to time, date, motion, location, geo-zone, input and other event combinations. With PEG, your unique application will meet demanding customer requirements. This behavior can be programmed by CalAmp before shipment, at a customer’s facility, or over-the-air once the unit has been fielded.

OVER-THE-AIR SERVICEABILITY

The LMU-4200 also leverages CalAmp’s industry leading over-the-air device management and maintenance system, PULS™ (Programming, Updates, and Logistics System). Configuration parameters, PEG rules, and firmware can all be updated over the air. PULS offers out-of-the box hands free configuration and automatic post-installation upgrades. You can also monitor unit health status across your customers’ fleets to quickly identify issues before they become expensive problems.

Specifications
General

Communication Modes 

GPRS/EDGE/HSPA and CDMA 1xRTT packet data, UDP and SMS

Location Technology 

50 channel GPS

Operating Voltage

12 volt vehicle systems

GPS

Location Technology

50 channel GPS (with SBAS)
SBAS: WAAS, EGNOS, MSAS, GAGAN

Location Accuracy

2.0 meter CEP (with SBAS)

Tracking Sensitivity

-162dBm

Acquisition Sensitivity

-147dBm

Kick Start

3 sec @ -130 dBm

AGPS Capable

Cellular

Data Support

SMS, GPRS, CDMA 1xRTT or HSPA packet data

Operating Bands (MHz)

GSM/GPRS:

850/900/1800/1900

CDMA/1XRTT:

850/1800

HSPA/UMTS:

800(VI)/850(V)/900(VIII)/1700(IV)/1900(II)/2100(I)

Transmitter Power

GSM/GPRS:

850/900, 32.5 dBm
1800/1900, 29.3 dBm

CDMA/1XRTT:

850, 24 dBm
1800, 23 dBm

HSPA/UMTS:

All bands, 23 dBm

HSPA Data Rates

5.6 Mbps upload/7.2 Mbps download

HSPA Fallback

EDGE/GPRS/GSM quad band
EDGE MCS1-MCS9
3GPP Release 6

Comprehensive I/O
Digital Ignition Inputs

1 fixed bias

Digital Inputs

7 (high/low selectable 0-30 VDC)

Digital Outputs

5 (open collector relay 150mA)

Current Limited Outputs

2 (20mA)

A/D Inputs

4 (0 – 30VDC, +/-0.1V accuracy)

1-Wire® Interface

Driver ID, temperature sense

Status LEDs

GPS and cellular

Environmental
Temperature

-30º to +75º C (operating); -40º to +85º C (storage)

Humidity

95%RH @ 50º C non-condensing

Shock and Vibration

U.S. Military Standards 202G and 810F, SAE J1455

EMC/EMI

SAE J1113; FCC–Part 15B; Industry Canada

Electrical

Operating Voltage

6-32 VDC

Power Consumption

4 mA @ 12 V (deep sleep)
10 mA @ 12 V (sleep on network with SMS)
20 mA @ 12 V (sleep on network with GPRS)
70 mA @ 12 V (active tracking)

Physical

Dimensions

4.3 x 3.2 x 0.86” , (110 x 81 x 22mm)

Weight

4 oz, (113 g)

Connectors, SIM Access

External Cellular

SMC

External GPS

SMA (with tamper monitoring, 3.0v)

WiFi Option

RP-SMA

Vehicle Bus Option

DB-15

4-Pin Molex

Power, ground, ignition, A/D

Two 5-Pin Molex

Switched power serial

16-Pin Molex

Expansion port

22-Pin Molex

I/O connection

SIM Access

Internal only

Certifications
Fully certified FCC, CE, IC, PTCRB, Applicable Carriers
Mounting
Tie-wrap, adhesive, or Velcro
Screw mounting bracket
Features
Key Features

GSM/GPRS, CDMA 1xRTT, or HSPA configurations

Dual reporting 20,000 buffered message log

Built-in 3-axis accelerometer for driver behavior, motion sensing, hard braking, impact detection

32 built-in geo-fences, plus any combination of circle or polygon zones, up to 5400 points

Web-based device management diagnostic tools

Garmin®, MDT, and other advanced peripherals support

Power sleep modes

Comprehensive I/O system

Switched power serial ports

Optional Features/Functions

External antennas (GPS, cellular, combined GPS/cellular)

Serial adapter cable RS-232 8-wire (PPP, AT cCommands, NMEA GPS output)

jPOD dongle for truck ECU interface

Connectorized I/O wiring harnesses

Built-in or external backup batteries

Development Support Options
Customized hardware and software development available on request
Programming and Management Tools
Learn more about PEG and PULS, complimentary tools available to solution providers and channel partners for managing CalAmp devices.
Compatible Accessories
Serial Programming Cable: DE9 Female (DCE) to 5-pin Universal
Antenna: Roof Mount Antenna SMA/SMC, TriBand (Higher Accuracy Gain), 9′
Antenna: Window Mount, SMA/SMC, QuadBand, 9′
Power Harness: 4-pin to 4-wire with Fuse
Power Harness: 22-pin & 4-pin to 1-Bit Bus (2-pin), Switch/LED (4-pin), Buzzer (3-pin) and 3-wire Power Harness with Fuse, 6’4″
Power Harness: 22-pin to 20-wire I/O Harness, Non-Fused, 6″
Serial Adapter: 5-pin to DE9 Male (DTE)  with Switched Power and Selectable Voltage (12V default), 1′
vPOD 5-pin Serial OBDII Adapter, 3’4″
jPOD 5-pin Serial OBD Adapter, 18″
Garmin 5-pin Serial Cable, Mini USB, 9′
Temperature Sensor: 1-bit Bus, 4 leads, splice in.
iButton Reader and Cable Assembly (use with 5C250 or 5C260), 4′
Switch/LED and Cable Assembly  (use with 5C250 or 5C260), 4′
Buzzer and Cable Assy (use with 5C250 or 5C260), 2′
jPOD Deutsch Y-Cable

Additional information

Weight0.6 lbs
Dimensions7 × 5 × 2 in
Carrier

GPRS, HSPA, Sprint, Verizon, WiFi-No Cellular

Model

4220, 4225

Options

Base Model, Built-in JBus/CAN, WiFi (Client), WiFi Client Only – NO Cellular

Reviews

There are no reviews yet.

Be the first to review “CalAmp LMU-4200 Series”

Your email address will not be published. Required fields are marked *

Pin It on Pinterest

Share This